Display Two or More Room Names in One Room

You can place two or more room names in a single room - for example, for a connected dining and living room. There are two ways to do this:

 

 

Use the Divider Tool

You can use the Divider tool to create a dividing line across a room. The dividing line will not display in 2D and 3D Floor Plans but will allow you to create two virtual rooms in which to add room names.

  1. Open Walls mode. (Click or tap the red mode button and then click Walls).
  2. Click the Divider  tool.
  3. Draw a line across the room, to divide it into two virtual rooms.

    two_room_names_00.png
  4. Click the Select  tool, click inside one of the virtual rooms, and on the right, in Zone Name, type the name of the room.
    Tip: You can also use Select Zone Name to choose the name from the room name list.

    two_room_names_01.png

  5. If desired, press & drag the room names to move them.

 

 

Use a Text Label

You can also use a Text Label to add room names to connected rooms.

  1. Open Windows etc mode. (Click the red mode button and then click Windows etc.)
  2. Open the Symbols, Text & Lines category.
  3. Click to select the Text Label button.



  4. Click to place the text label on your design. You can press and drag to move the text label.
  5. With the text label selected, type a room name in the Label field.


  6. Repeat steps 3 - 5 for any other room names.

 

Related Articles

Don't Have the App Yet?

Make sure you have downloaded the RoomSketcher App to your computer or tablet.

Download Now ->

Was this article helpful?

Have more questions? Submit a request